Uplyftt Membership Program require to change account password.



*
*
*
 

Note:
Password should contains atleast one capital letter one lowercase letter and one symbol and number and must be atleast 8 characters in length.

Recent Entries

  • What are the Processing Methods for Spline Shaft?

    There are many processing methods for spline shafts. It mainly adopts cutting processing methods such as hobbing, milling and grinding, as well as plastic deformation processing methods such as cold hammering and cold rolling. Hobbing method: Use the spline hob to process the spline shaft mi...
  • Introduction of Motor Shaft

    Small motor shafts generally have the characteristics of high speed, frequent starting, and easy heating during work. The reasonable selection of materials and heat treatment for their working conditions are an important task before every designer. Make the best use of materials and Approp...
  • Features of Linear Shaft

    The linear axis is a connecting part that supports the work of the piston. Most of it is used in oil cylinders and cylinder motion execution parts. It is a moving part with frequent movement and high technical requirements. It is composed of a linear shaft (cylinder rod), piston and end cover. The q...
  • Design focus of Spindle Shaft Motor

    From the point of view of use, the servo motor is mainly responsible for the feed of the machine tool, so that the workpiece moves to the tool or the tool moves to the workpiece, which is mainly to realize the cutting work, which requires relatively high torque and control accuracy; and the spindle ...
  • How to Install Linear Shaft?

    In linear and sliding motion mechanisms, a linear shaft rod plays a crucial role. Without a linear shaft, we wouldn’t complete a sliding mechanism with linear power transmission. But, the manufacturing and choosing of the appropriate linear shaft can get tricky. Linear shafts can ha...
  • The Effect of Motor Shaft Misalignment

    Proper motor shaft alignment increases the operating life span of rotating machinery. To achieve this goal, components that are the most likely to fail must be made to operate within their acceptable design limits. While misalignment has no measurable effect on motor efficiency, correct s...
  • The role of Spline Shaft

    The spline shaft is a kind of mechanical transmission. The flat key, half-circle key, and oblique key have the same function to transmit mechanical torque. There are longitudinal keyways on the surface of the shaft, and the rotating parts on the shaft also have corresponding keyways to kee...
  • What is Propeller Shaft?

    Automobile transmission is the basis of automobile driving. The role of the automobile transmission system transfers the power output from the engine to the driving wheels to make the automobile move. The automobile transmission system is composed of a clutch, a transmission, a Propeller Shaft,...
  • The Importance of Motor Shaft Alignment

    Proper motor shaft alignment increases the operating life span of rotating machinery. To achieve this goal, components that are the most likely to fail must be made to operate within their acceptable design limits. While misalignment has no measurable effect on motor efficiency, correct s...
  • Key Points of Designing Motor Shaft

    Small motor shafts generally have the characteristics of high speed, frequent starting, and easy heating during work. The reasonable selection of materials and heat treatment for their working conditions is an important task for every designer. Make the best use of materials and Appropriate hea...
  • What is Spindle Shaft Orientation Function?

    Usually, the spindle shaft is only for speed control, but in some special cases, it is also necessary to control the position of the spindle. For example, when an automatic tool change is performed on a machining center when a tool needs to be changed due to technological requirements in boring proc...
  • How to Maintain Drive Shaft?

    The drive shaft is an important part of the transmission of power in the automobile driveline. Its function is to transmit the power of the engine to the wheels together with the gearbox and drive axle so that the automobile generates driving force. It is composed of a universal joint, a telescopic ...