Uplyftt Membership Program require to change account password.



*
*
*
 

Note:
Password should contains atleast one capital letter one lowercase letter and one symbol and number and must be atleast 8 characters in length.

Lotion Pump Manufacturer Introduces The Use Process Of Foam Pum

  •  

    Lotion Pump  Manufacturer introduces the characteristics of PET foam pump ****:

    1. The heat distortion temperature and long-term use temperature are the highest/highest among thermoplastic general engineering plastics.

    2. Because of its high heat resistance, the reinforced PET is immersed in a solder bath at 250°C for 10 seconds, and it hardly deforms or discolors. It is especially suitable for preparing soldered electronic and electrical parts.

    3. The bending strength is 200MPa, the elastic modulus is 4000MPa, the creep and fatigue resistance are also very good, the surface hardness is high, and the mechanical properties are similar to thermosetting plastics.

    Through the above introduction, Mist Pump Box Wholesaler hopes that you can simply refer to the content of this article in future use.