Uplyftt Membership Program require to change account password.


Password should contains atleast one capital letter one lowercase letter and one symbol and number and must be atleast 8 characters in length.

Working Knowledge Of Lotion Pump

  • The working principle of Lotion Pump :

    1. First press: When the press **** is pressed for the first time, the press **** drives the auxiliary column to compress the spring together through the connected main column; in the process of compressing the spring, the outer wall of the piston rubs against the inner cavity wall of the body to prompt the piston to open the discharge of the auxiliary column Hole; When the piston slides down, the air in the body is discharged through the opened secondary column discharge hole;
    2. Press repeatedly to and fro: expel all the air in the body;
    3. Liquid suction: After pressing the **** with your **** through the main column, sub-column, piston, and the common compression spring to expel the air in the body, loosen the **** spring because it loses pressure and moves back (up). At this time, the piston is the same The discharge hole of the auxiliary column is closed by rubbing the inner wall of the main body downward; at this time, the liquid storage cavity in the main body forms a vacuum suction state, and the glass ball is sucked up, and the liquid in the bottle is sucked into the main body liquid storage through the straw Cavity.
    4. Storing liquid: Press and hold the **** several times, and store the liquid in the body through multiple suction until the liquid is full.
    5. Liquid discharge: When the liquid in the body's liquid storage cavity is full, press the **** again and the liquid will be sprayed directly from the nozzle through the discharge hole;

    Through the above introduction, Steel Balls Wholesaler hopes that you can simply refer to the content of this article in future use.